Pressure Transducers
For use with Vnet Analog Box
For your data recorder to be able to monitor an analog channel it must receive a signal that it can recognize. The modules shown here convert the analog parameters to a standard 0-5 volt signal required by the recorder. The transducer modules (combination sensor and signal conditioning modules) provide direct connection to the measured parameter, such as fuel or oil pressure. The signal conditioning modules allow the connection of remote sensors, such as thermocouples or position sensors, to the data recorder.
| 810-MD-PT-(specify psi) |
|
Pressure Transducer
- Available in psi ratings of:
1.5 / 15 / 30 / 60 / 100 / 200 / 300 / 400 / 500 / 600 / 1000 / 1500
- used to convert the signal from parameters such as fuel, oil, or nitrous pressure. |
| 810-MD-VAC |
|
Vacuum Transducer
- 0-30 " Hg
- Typically used when monitoring manifold or pan vacuum. |
|
