|
|
| PRO Series Cables |
|
Cables for the Pro series recorders, although sometimes similar in appearance to other cables, are tailored specifically for their individual uses. It is important to use the proper cable for each application.
| Engine RPM |
PN# |
Fiber Optic Cable (Order in even one foot increments)
(Connects spark pickup module to recorder) |
800-OP-CABLE |
| RPM Module |
PN# |
Data Recorder to RPM Module
(Available in various lengths from 8 to 180 inches) |
800-CA-13H-(specify length) |
| Clutch RPM Sensor to RPM Module, 2 Pin (Early) |
800-CA-2PM-(specify length) |
| Clutch RPM Sensor to RPM Module, 3 Pin (Late) |
800-CA-3PM-(specify length) |
| Drive Shaft RPM Sensor to RPM Module, 2 Pin |
800-CA-2PM-(specify length) |
| Ring Gear RPM Sensor to RPM Module, 3 Pin |
800-CA-3PM-(specify length) |
| Front Wheel Sensor to RPM Module, 2 Pin (Early) |
800-CA-2PM-(specify length) |
| Front Wheel Sensor to RPM Module, 3 Pin (Late) |
800-CA-3PM-(specify length) |
| Flow Meter to RPM Module |
800-CA-FM-(specify length) |
| Power (On/Off) Switch to RPM Module |
800-CA-PWR-(specify length) |
(Early recorders are those manufactured before 2001. Late is 2001 and newer.
2 pin and 3 pin denotes the type of connector that is attached to the sensor.) |
| Pro Analog Transducer Box |
PN# |
Recorder to Transducer Box, or Box to Box
(Available in various lengths from 8 to 180 inches) |
800-CA-13H-(specify length) |
Low Temp Thermocouple (0-500°) to Transducer
(For cable lengths less than 36 inches) |
800-CA-TCEXT-XX (specify length) |
Low Temp Thermocouple (0-500°) to Transducer
(For cable lengths greater than 36 inches) |
800-CA-TCEXT-XL (specify length) |
| Travel/Position Sensor (Linear) to Transducer |
800-CA-LIN-(specify length) |
| G-Meter to Transducer |
800-CA-GM3-(specify length) |
| Ride Height Sensor to Transducer |
800-CA-3PM (specify length) |
| Timing Module |
PN# |
PRO II Recorder to Timing Module
(Available in various lengths from 8 to 180 inches) |
800-CA-13H-(specify length) |
| TDC Sensor to Timing Module |
800-CA-3PF-(specify length) |
| MSD Delay Box to Timing Module |
800-CA-DBX-(specify length) |
| Mag Phasing, Magneto to Timing Module |
800-CA-MAG-(specify length) |
Exhaust Gas Temperature
(Measured from recorder to end of longest leg) |
PN# |
| Recorder to EGT Junction Boxes, Standard |
800-CA-EGT-(specify length) |
| Recorder to EGT Junction Boxes, Reversed |
800-CA-EGTR-(specify length) |
| (Available in 8', 10', 11', 12', 13', 14', 15' lengths) |
| Pro Dash |
PN# |
Pro Dash to PRO II Recorder
(Connects spark pickup module to recorder) |
110-CA-DASH-(specify length) |
|
Official contingency sponsor |
 |
 |
 |
|
Click here to add this page to your favorites |
|
|
30402 Esperanza, Rancho Santa Margarita, California 92688 • Phone: 949-709-5555 • Fax (949) 709-5556
All text, descriptions, software, images, and other content of this website are the property of Competition Systems, Incorporated. All rights reserved.
|
| |
|
